好大好硬好爽免费视频
                    Vacuum furnace
                    n_bb1
                    current location: Home?>>? 新聞資訊 >> Company news

                    Contact information

                    Taicang Huarui Vacuum Furnace Co., Ltd
                    Address: No.1, Nanzhuan Road, Shuangfeng town, Taicang City
                    Contact person: Zheng Xinghua
                    Mobile: 13285178098
                    Contact: Guan Zhanlong
                    Mobile: 18606226806
                    Contact person: Zheng Shuai
                    Mobile: 13285179528
                    Tel: 0512-88826556
                    Fax: 0512-53630028
                    Email: 1306769879@qq.com
                    National Service Hotline:
                    0512-53630028
                    Website: www.coffeekate.com

                    Selection of oil surface pressure in heat treatment of vacuum quenching furnace

                    Release date: 2014-04-25 00:00 source: http://www.coffeekate.com Click:

                    In the process of oil quenching heat treatment with vacuum quenching furnace, the cooling capacity of vacuum quenching oil decreases under low vacuum pressure, which may not achieve the purpose of quenching for some steels. Therefore, before using the vacuum quenching furnace to quench, it is necessary to fill a high purity neutral or inert gas into the quenching chamber to cause a certain pressure on the oil surface, so that the steel can be fully quenched and a bright surface can be obtained. The lowest surface pressure which can obtain the same quenching hardness as that under atmospheric pressure is called critical quenching pressure. The critical quenching pressure is related to the properties of vacuum quenching oil and the hardenability of steel.

                    When using the vacuum quenching furnace to quench the steel with poor hardenability, the way of filling gas first and then adding oil should be used to quench. The oil level pressure should be higher than the critical quenching pressure. Generally, the adjustment is about 5 × 104pa, but it should not be lower than 1.0 × 104pa. For medium hardenable steel, the method of filling gas before oil should be adopted. The pressure of the oil surface can be adjusted at about 1.0 × 104pa, but it can not be lower than 5 × 103pa. The steel with good hardenability can be quenched by means of air charging or non air charging. The way of air charging can be adopted. The heating chamber of the vacuum furnace can be filled with air first and then oil, or oil first and then gas. When adopting the way of inflation first, the inflation pressure can be selected within the range of (2.5 ~ 5) × 104pa. In order to prevent and reduce the steam entering and polluting the heating chamber of the vacuum quenching furnace, a higher inflation pressure should be selected, and the gas used should be high-purity neutral or inert gas. The method of post inflation can be used to fill the gas with lower purity and lower inflation pressure. Adopt the way of not filling air for quenching, that is, the workpiece is not filled with neutral or inert gas before and after filling oil.

                    Related tags: 真空爐

                    National Hotline

                    0512-53630028
                    Address: No.1, Nanzhuan Road, Shuangfeng
                    town, Taicang, Suzhou, Jiangsu
                    Email: 1306769879@qq.com

                    Pay attention to us
                    Copyright ?http://www.coffeekate.com/en/ Taicang Huarui Vacuum Furnace Co., Ltd 專業從事于Vacuum furnace,Vacuum gas quenching furnace,Vacuum oil quenching furnace, 歡迎來電咨詢!
                    Welcome to leave us a message
                    Please enter your message here, we will contact you as soon as possible。
                    Contact person
                    Landline / mobile number
                    Xiangyun platform technical support